PCS - Powertrain Control Solutions

· Home
· Military & OEM
» Transmission Control
· Performance Aftermarket
» Data Logging
      · D200 Dash Logger
      · Packaged Kits
      · Add-On Features
      · Accelerometer Module
      · EGT Module
      · Data Logging Sensors
      · ECU Data Logging
      · GPS
» Engine Control
      · XFC-2000 Controller
      · Wideband O2
      · Fuel Delivery
      · Sensors & Accessories
» Transmission Control
      · Simple Shift Controller
      · TCM-2000 Controller
      · Harness
      · Paddle Shifter
      · Sensors & Accessories
· Support
» Developers
· Dealers
· Contact
· About

D200 Dash Logger
Click to Enlarge
D200 Dash Logger
Part Number: DIS-2022

$800.00
Suggested
Retail

Product Description:

The innovative trends at Powertrain Control Solutions continue with our D200. For the first time, a unit is available which can bring together all the information on a vehicle from almost any input system for monitoring, datalogging & analysis. Unmodified and heavily modified vehicles alike can benefit from the D200 which can combine any set of inputs into one unit. Want to bring together the information from your Lambda meter, aftermarket ECU, transmission controller, fuel controller, MAP sensor, throttle position sensor, vehicle speed and much more? The D200 is your answer. These powerful attributes coupled with a large and easily viewable, even in direct sunlight, LCD touchscreen break new ground.

Product Specifications:

· 2 x CAN 2.0b
· RS-232 (Communication with Aftermarket ECUs)
· PC Communication & Download Capability
· Realtime Datalogging & Monitor Screens
· Native Communication with PCS Devices
· 2 Frequency Inputs (RPM, wheel speed, etc)
· 8 Programmable Analog Inputs (MAP, MAF, TPS, CLT, etc.)
· High Resolution (320x240) LCD Screen
· Fully Programmable, Display any Input Parameters
· High Sensitivity, Resistive Touchscreen
· Datalogging from CAN, RS-232 & Built-in Inputs
· Central Datalogging Location for all Electronics
· In-Field Flash Upgradable
· Offered in a durable 4.6 x 6.9 x 1.4in case
· 2MB Standard Memory
· 120 min of typical Datalog time for 25 Channels at 10
samples/sec for 2MB Standard Memory

Supported Serial ECU's
Requires Part Number DIS-4100

AEM

Autronic SM2, SM4, SMC

Electromotive TEC2

Electromotive TEC3(R)

FAST Classic ECU

Microtech

Sakura FC-10

Supported CAN ECU's
Requires Part Number CON-5500

Electromotive TECGT *Additionally requires part number DIS-4110

FAST XFI

MOTEC M400, M600, M800

Our computer requirements are:
· Processor: Pentium 400MHz or above
· RAM: 64MB
· OS: Windows 2000, XP, Vista
· Hard Drive Space: 10MB for install, additional space for datalogs & calibrations
· Video: 1024x768 or greater resolution
· Peripherals: CD-ROM or internet connection required to obtain software

Documentation & Downloads:

D200 Software and Firmware v1.25.8 (7MB, Posted Jun 10, 2009)
   Most recent D200 software and firmware.

D200 Firmware v1.25.8 (406kB, Posted Jun 10, 2009)
   Most recent D200 firmware. We recommend downloading the software with the firmware.

D200 Firmware Upgrade Procedure (96kB, Posted Jun 10, 2009)


D200 Manual (1MB, Posted Jun 10, 2009)


D200 Harness Schematic (107kB, Posted Jun 10, 2009)


D200 Mounting Template (51kB, Posted Jun 10, 2009)
   D200 mounting template for the plastic D200.

D200 Windows XP, Vista 32-bit Drivers (258kB, Posted Jun 10, 2009)
   D200 USB drivers for Windows XP and Vista 32-bit. These drivers are included with the software download.

D200 Windows XP, Vista 64-bit Drivers (799kB, Posted Jun 10, 2009)
   D200 USB drivers for Windows XP and Vista 64-bit.

Click to Enlarge	D200 Desktop Programming Kit Part Number: DIS-4001	$35.00 Suggested Retail

Click to Enlarge	D200 Suction Cup Mount Part Number: DIS-5000	$35.00 Suggested Retail

Click to Enlarge	Insertion/ Extraction Tool for TCU and D200 Pins Part Number: TOL-1006	$8.00 Suggested Retail