|
Diagnostic Trouble Codes
|
 
|
Diagnostic trouble codes provide failure determination for several parameters.
The monitor screen will indicate an analog failure and the main window will flash
red when an overtemp condition occurs. The fail low analog value is triggered
when the voltage of an analog input goes below the programmed analog failure
value for that input. The fail high analog value is triggered when the voltage of
an analog input goes above the programmed analog failure value for that input.
The fail high battery voltage is 25 volts. Above this voltage, the unit will (cease to
function?). The fail high temperature is 248 degF or 120 degC. Above this
temperature, the unit will shut down to protect the electronics. The fail low
temperature is -22 degF or -30 degC.
