Retrieve Calibration from TCU

---

To begin working with the information stored on your TCU, simply plug the TCU into your com cable.  The TCU software should automatically detect the presence of the TCU.  When the TCU is detected, the background color should change from a gray to a blue color and you will receive a message like the image above.  To bring the information from the TCU to your software, choose yes and all of the information will proceed to upload.  At this time you will be in online mode and working live with the TCU.  Any changes you make will be immediately written to the TCU.  You may wish to save your file to your computer after making changes to ensure that you have a backup copy of your calibration.

You may disconnect and reconnect by  clicking the online mode button on the toolbar.  From the images below, you can see that the unit is disconnected when the online mode image is disconnected and the circle is black.  You can see that the unit is connected when the image is connected and the circle is green. Whenever reconnecting, the option to auto-retrieve a calibration will be displayed.