Search found 15 matches

I found the problem yesterday ,, I didnt have the problem when the motor was completely stock ,, the problem started after I tweaked the pump and installed the boost elbow ..

Anyway the failure de ...

We have the trans pretty well dialed in ,, we are now trying to find out why the TCC would unlock all of a sudden under hard acceleration ..

It willl hold until the motor really starts loading ,, a ...

Hi ,, When we did the engine swap in the F-350 we no longer use the check engine light ,, I read once that the PCS can use this as its own malfunction indicator ,, do you just program one of the digit ...

Thanks Russ ....

When I get the truck back in I'll do that ..

The customer loves the system ,, the trans builder was saying the controller is better than the TCI system he is used to setting up ...

Hello ,,,, its Im back on the Cummins swap project in the 95 F-350...

The trans was smoked ,, thats why I had so many problems trying to tune it in ...

So now its been rebuilt ,, has an ATS conv ...

After talking to one of the tech guys I did turn up the preassure ...

Tha trans was on its way out though and that just complicated the adjustments ...

It had around 200,000 miles of hard use an ...

Russ you hit it on the nail !!!!!!!

After scratching my head for a few hours I decided to disconect the harness from the trans and see what happends ,,, the same thing !!!

Its over at Top Jimmy ...

I was looking at the truck last night after work and decided to disconnect the harnesses from the transmission to see what happends ,, the truck still is locked in drive ,, so one of the valves in th ...

I installed a new MAP sensor and had a minor problem with not getting line preassure at low throttle input talked with a tech and thought I fixed the issue ,, now the trans is locked up in drive ,, I ...

I just installed a 2 bar MAP sensor and calibrated it as 1.6 volts as 0 PSI and 4.9 volts as 18 PSI ...

The trans slips until about 3 PSI then it seems to all of a sudden kick in and the truck star ...

Russ ,, your awsome !!!!!!

I'll get this going tomarrow and thanks again for your help ...

I'll definitely be getting ahold of PCS when I do the Allison swap on my motorhome !!!!!!

Thanks !!! ...

Hi ,, I just recieved the GM 3 bar MAP sensor ..

The sensor came with the plug and wiring harness but I dont know the wire positions of the 3 wires ,,, Its marked A,b,c but I need to know where th ...

I was just looking at your online store and noticed your GM 3 bar sensor ,, The one Im currently using probably wont do when we start swapping turbos and use more boost ..

Are they available in st ...

OK I found the problem ...

I had made some changes before replacing the MAP sensor and didnt recal the TCU before testing ...

Hello ,, I installed a TCU on a Ford F-350 converted to a 12 valve Cummins motor ..

Everything went fine but I had to track a problem down which happened to be a bad MAP sensor I was using for the ...