Wiring questions !!!

907dragdiesel · New Member Joined: Apr 11, 2008 Posts: 15

Hello ,,,, its Im back on the Cummins swap project in the 95 F-350...

The trans was smoked ,, thats why I had so many problems trying to tune it in ...

So now its been rebuilt ,, has an ATS converter ,, valve body and a few tricks the trans builder knew about ????

Im cleaning up the rest of the install and getting ready to put away the wiring and the controller in its new hiding place in the dash ...

I need to connect the overdrive switch ,, it shifts all gears and goes into over drive wether you have the OD switch on or off ...

I remember asking you for the wiring on the harness ,,, its supposed to connect to the origional harness from the stock trans,, for reverse lights and such ,, I cant remember what you gave me for the wiring ???

Can you help me out on this one ...

BTW everything works great ,,, the trans shifts gears nice and firm and the lockup clutch is awsome ...

Russ · PCS Employee Joined: May 12, 2004 Posts: 286

You can connect the O/D switch to one of our digital inputs. It can then be setup to cancel 4th gear or anything else you want. On your truck the wire you want to locate for the button is Tan/White pin 29 on the ecm. If you want to control the O/D cancel light its white/light green pin 79. You can connect the light to a spare output to use as an indicator.

Russ

907dragdiesel · New Member Joined: Apr 11, 2008 Posts: 15

Thanks Russ ....

When I get the truck back in I'll do that ..

The customer loves the system ,, the trans builder was saying the controller is better than the TCI system he is used to setting up ,, I told him about you guys so maybe he will bw using PCS in the future !!!!

Thanks again ...