ACCESSORY KITS

Dipstick, Shield, & Vent Kits
Heat shields, dipsticks, and vent kits are required for proper integration of the 4L60/70 transmission. The end user can design their own or use the products supplied by PCS.




Part # Description Contents
TRN7006 Vent Kit 1-6,9 unassembled
TRN7011 Dipstick Kit 10-11,17 unassembled
TRN7012 Shield Kit 18-19, unassembled

Ref Part # Description Qty
1 TRN7023 Large Vent Plug 1
2 TRN7024 Y Fitting 1
3 TRN7022 Small Vent Tube 1
4 TRN7025 Large Vent Tube 1
5 TRN7517 M8x1.25 Flanged Nut 1
6 TRN7028 Vent Mounting Bracket 1
7 TRN7519 M8/M10 Flanged Stud 1
8 TRN7027 Zip Tie w/ Hole Mount 1
9 TRN7026 Vent Cap 1
10 TRN7032 Dipstick 1
11 TRN7031 Dipstick Tube 1
12 TRN7519 M8/M10 Flanged Stud 1
13 TRN7518 M8 Cinch Nut 1
14 TRN7522 M6x1 Flanged Nut 1
15 TRN7010 SAE4 Dipstick Bracket 1
16 TRN7510 M6x1x12mm Flanged Bolt 1
17 TRN7030 Dipstick Seal 1
18 TRN7021 Heat Shield 1
19 TRN7506 M8x1.25 x12mm Flanged Bolt 2



TPS Kits
Throttle position is required for transmission operation. If TPS is not available over CAN, there must be a sensor to transmit pedal position to the TCM. Kits are shown below.




Part # Description Contents
TCM6030 Perkins TPS Kit (3.5" Threaded Rod) 1-13, assembled
TCM6035 Cummins TPS Kit (2" Threaded Rod) 1-13, assembled


Ref Part # Description Qty
1 HDW0412 #10 Stainless Steel Washer 1
2 HDW0416 Balljoint Linkage 1
3 GSM0207 #10-32 Stainless Steel Nut 2
4 HDW0415 #10-32 3.5" Threaded Rod (Perkins) 1
4 HDW4020 #10-32 2" Threaded Rod (Cummins) 1
5 HDW0411 #8-32x1.75" BHCS Bolt 2
6 HDW0418 Balljoint Linkage, Quick Disconnect 1
7 HDW0421 #4-40x0.25" Set Screw 1
8 HDW3002 TPS Linkage Adapter 1
9 HDW0422 #10-32 Nylon-Insert Hex Nut 2
10 SNS0002 Throttle Position Sensor 1
11 HDW0413 #8x0.75" Unthreaded Spacer 2
12 CSE9116 TPS Bracket 1
13 HDW0410 M6x1.0x10mm BHCS Bolt 2